RV Converter Not Charging Battery

You’re driving down the road in your RV, enjoying the scenery, and thinking about all the places you want to visit. Suddenly, you notice that your battery gauge is reading “empty,” and you realize that your RV converter is not charging the battery. What do you do?

If you own an RV, you know that the electrical system is one of the most important things to keep in good working order. It includes the RV converter, which is responsible for charging the batteries. If your converter stops working, it can be a pain to recharge the batteries manually constantly.

RV Converter Not Charging Battery - How to Troubleshoot

Relation of RV Converter with the Battery:

The recreational vehicle converter is one of your RV’s most important electrical components. It is responsible for converting 120-volt AC from shore power or a generator into 12-volt DC to run your RV’s lights, appliances, and other equipment. It is typically located in a cabinet near the front of the RV and is usually mounted on the floor or the wall.

The relation of the RV converter with the battery is very important. The converter helps to keep the battery charged when the RV is plugged in or running the generator. Without a converter, the battery would eventually run out of power, and the lights, appliances, and other equipment in the RV would not work.

Moreover, RV converters are available in different sizes and capacities. The size and capacity of the converter you need will depend on the size and number of batteries in your RV and the amount of power you use.

Troubleshooting The RV Converter To Charge The Battery 

If you’re having trouble with your RV converter while charging the battery, you can check a few things to see what might be the problem.

1. Evaluate The Power Source:

Evaluate the main power source of your batteries and make sure that the power source is turned ON and that proper voltage is coming from it. If you find out that the power source is turned off, turn it ON and check whether the voltage is correct or not.

2. Check the Connections:

You need to check the connections when your RV converter is not charging your battery. It would help if you securely connect the positive and negative wires to the converter and the battery. If they are not connected properly, then that could be why your converter is not working. Also, make sure they are free from corrosion.

3. Check Converter’s Cooling Fan:

The converter’s fan is an integral part of the system, you should check its working if the converter is not charging the batteries. If the fan is not working properly then there are chances that the components will heat up and get damaged.

If you find out that the cooling fan is not working then you should immediately change it to solve your problem.

4. Check Converter’s Thermal Sensor:

If the thermal sensor of the converter is not working then it will not start the cooling fan when it is required. This can damage the internal components and the overall working of the converter. A multimeter can help you in assessing the working of the thermal sensor. Once you are sure that the thermal sensor is out of order, you need to change it to save yourself from any big trouble.

5. Assess The Circuit Board:

Often a sudden change in power trips a breaker or a fuse, so assess your circuit board carefully to know if any of the breakers or fuse need to be changed. It is advisable that you check each fuse by turning it OFF and ON to check it’s working. If your fuse is burnt you can change it yourself easily but for a burnt breaker, you need the help of a professional electrician as rewiring of the breaker will be required.

6. Look Out For Corrosion:

If your converter is not charging the battery then you should check the circuit board for corrosion. To check thoroughly you will need to remove the external body of the circuit board, if you find any flaky white substance inside it then it means there is corrosion on the circuit board.

To resolve this issue, you need to remove the corrosion from the circuit board by thoroughly cleaning it. But before cleaning disconnect all power sources from the RV converter. To clean the board make a solution of 12 ounces of water with 1 teaspoon of baking soda and mix it well. Cautiously clean the board with this solution and let it dry completely. Once it is completely dry you can reconnect the power.

7. Spot A Burnt Resistor Or Diode:

A burnt resistor or diode can also be the reason for your converter’s bad performance. You can spot a burnt resistor or diode yourself because it will look different from the rest of the components that are not burnt.

To change a resistor or diode you require a fair amount of knowledge related to electrical components. If you don’t have that much knowledge then we advise that you refrain from changing it yourself and look for expert help.

8. Analyze The Condition Of The Battery:

As your RV battery ages, it will become less efficient at holding a charge. It means it won’t be able to power your RV for as long as it used to when it was new. Additionally, an old RV battery may not be able to charge as well as it used to. It is essential that you take good care of your batteries depending upon their type to keep them well-maintained.

Lead-Acid Battery

If you have a lead-acid battery in your RV, you may need to add water to the battery to charge it. This is because lead-acid batteries can lose their charge over time, and adding water can help keep the battery charged.

To add water to a lead-acid battery, first, ensure that the battery is not turned on. Next, remove the battery cap and slowly pour water into the battery until the level reaches the top of the lead plates. Finally, replace the battery cap and turn ON the battery.

If you have an RV with a lead-acid battery, it’s crucial to keep an eye on the water level regularly and add water as needed. Doing so can help ensure that your RV battery stays charged and is ready to power your RV.

Find Out More: Fastest Way To Charge Rv Batteries?

Lithium-Ion Battery

If you have a lithium-ion battery, you need to charge it using a different method than the lead-acid batteries typically used in RVs. Lithium-ion batteries can be damaged if charged using a lead acid charger, so it is necessary that you charge them with the right charger.

There are several ways to charge a lithium-ion battery, and the best method for you will depend on your battery needs and your RV setup.

One option for charging a lithium-ion battery is through solar panels. Solar chargers are a great option for boondocking or dry camping, as they allow you to charge your battery without hooking up to a power source. 

Another option for charging a lithium-ion battery is to use a generator. If you have a generator, you can plug your RV’s electrical system into the generator and charge your battery that way. It is a good option if you cannot use a solar charger or need to charge your battery quickly.

Finally, you can also charge your lithium-ion battery by plugging it into an AC power source, such as a shore power connection or a portable generator. It is the fastest way to charge your battery, but it is not always an option if you are boondocking or dry camping.

Summing Up

If you’re like most RVers, you’ve probably had the experience of your RV converter not charging the battery. It’s a frustrating problem, but there are a few things you can do to troubleshoot it.

First, ensure the power source is working, and the connections are secure. Also, check the fuse. A blown fuse is often the culprit and is an easy fix. Replace the fuse, and you’ll be back on your way in no time. Next, inspect the condition of the battery. If it is a lead-acid battery, it may need to be charged. Finally, check the converter itself for any problems.

We hope this article has helped explain how to troubleshoot your RV converter when it cannot charge the battery.

Learn More: Which Battery Starts RV Generator?
Learn More: How To Charge Rv Battery With Generator?


Frequently-Asked Questions (FAQs): RV Converter Not Charging Battery

1. How do you know if your RV Converter is bad?

If your RV converter is bad, you might notice a few things. For example, your lights may flicker or dim when you turn ON appliances like your television or microwave. You may also notice that your battery doesn’t seem to be charging as quickly as it used to or that it’s taking longer for your RV to start up. 

2. What are some possible reasons for an RV converter not charging the battery?

Several factors can be responsible for this problem, the most common cause is a problem with the wiring between the converter and the battery. Another possibility is a problem with the converter, such as a blown fuse or tripped circuit breaker. Finally, the battery may be faulty or need to be replaced.

3. What are some tips for troubleshooting an RV converter not charging the battery?

First, check the wiring between the converter and the battery. Make sure all connections are tight and free of corrosion. If the wiring appears to be in good condition, next, check the converter itself. You need to reset any blown fuses or tripped circuit breakers. If the converter still does not work, the battery may need to be replaced.

4. How often should I replace my RV battery?

Depending on how often you use your RV, you may need to replace the battery every 2-3 years. However, if you frequently use your RV or go on long trips, you may need to replace the battery more often. We recommend checking the condition of your battery every six months and replacing it if necessary.


Similar Posts